Trace the heart template on to your SFS, peel off the backing and then stick it to your felt.
The Embroidery Floss I used is DMC stranded and I used 2 strands throughout to stitch the design.
Start by stitching the outer most line in back stitch.
Complete the 3 other outlines in Back Stitch alternating colours if preferred.
The centre lines are stitched in Fly Stitch – start at the top of the left line and stitch a continuous line of Fly stitch down to the bottom and then do the same to the right side.
Now trim the excess SFS off from around your design just like the picture.
Next, Place the whole piece in a bowl of luke warm water (make sure the whole design is submerged) and leave it for an hour. You will see the stabilser start to dissolve just like magic!
After about an hour, take it out and run it under a tap of luke warm water to remove any little stubborn bits that are still hanging around. Then squeeze out any excess water keeping the felt flat – you can place it between 2 towels and press hard to squeeze out quite a bit of the water and then hang it up to dry.
Displaying in a hoop…
Iron a piece of Bondaweb to the Back of your Heart (before you cut the felt shape out).
Using sharp scissors, carefully cut around the outer edge of the heart approx. 1/8th inch from your stitches – if you are not confident then a bigger space of 1/4 inch will still look fine.
Remove the paper backing of the bondaweb and then iron the heart centrally to your chosen piece of fabric.
Cut the Heart shape out as described for the above hoop art then take your second piece of felt and place it on the back of the Heart (Embroidery side up).
Hoop up your design and display!
Making a Felt Decoration…
Using a sewing thread to match the colour of the felt, sew a nice tiny neat running stitch around the edge sewing the 2 pieces together. Start at one of the lower sides and sew up to the centre top – just before the centre top – take your ribbon – fold it in half and insert the 2 ends in between the pieces of felt at the top just enough so they will be sewn in securely and give you a nice hanging loop.
Continue with the running stitch and then before you reach where you started – leave a big enough gap to insert your stuffing – pop sufficiant in to plump it up so it is soft and squidgy and then close the gap and secure in the ends to the back.
Finally you are going to very carefully cut around the remaining felt edges to create your heart.
And there you have it, 2 lovely options for a very simple design.
Come back next week when I will show you how to stitch the next Hand Embroidery pattern called Mr Bear.
A bright, happy and most importantly large space to share some exciting embroidery tips, tricks and free patterns! I am going to kick things off with these wonderful autumnly beginner patterns for you to enjoy…
Ooooh, these are so fun and I have 2 options for you – lovely embroidery hoop art or some Felt hanging decorations – what will you choose!? Watch this space as I am nearly completed getting these guys written up so you can get stitching… not long now…